UNICOM WEP-72104G-1 Instruction Manual

i.LON®100 e3 Hardware Guide@®078-0311-01A

4 i.LON 100 e3 Hardware Guide Figure 1.1 i.LON 100 Internet Server DIN Rail Locking Tab Location Wiring Connections Once you have mounted the i.LON

i.LON 100 e3 Hardware Guide 5 Service PinRS-485SerialRS-232Serial+12V<20 mALonTalkDigitalInputsRJ-45 10/100 Base TEthernetPortReset SwitchMains

6 i.LON 100 e3 Hardware Guide Screw Terminal Connectors The next step is to connect the screw terminal connectors. The screw terminals accept 0.22

i.LON 100 e3 Hardware Guide 7 ! Safety Warning Fuse F350 in the i.LON 100 server uses a Wickmann rated 250 VAC, .5 A, SLO-BLO. ! Safety Warning T

8 i.LON 100 e3 Hardware Guide auto-ranging, auto-setting mains power supply. It is not necessary to adjust any jumpers or other settings when connec

i.LON 100 e3 Hardware Guide 9 ! Safety and High Voltage Warning Ensure that the AC power mains are turned OFF before removing the cover, handling

10 i.LON 100 e3 Hardware Guide ! Sicherheitshinweis: Vorsicht Netzspannung! Stellen Sie sicher, daß die Netzspannung ausgeschaltet wurde (Schalters

i.LON 100 e3 Hardware Guide 11 Figure 1.4 i.LON 100 Server LONWORKS TP/FT-10 Free Topology Twisted Pair Terminals Table 1.2 lists the enclosure m

12 i.LON 100 e3 Hardware Guide Table 1.2 i.LON 100 Server GSM Modem Connections GSM Modem DB 9 Pin i.LON 100 Screw Terminal Enclosure Marking 1 Not

i.LON 100 e3 Hardware Guide 13 Figure 1.5 i.LON 100 Server EIA-232 and RS-485 Port Terminals Table 1.3 lists the enclosure marking for each of th

Echelon, LONWORKS, LonTalk, Neuron, LONMARK, and the Echelon logo are trademarks of Echelon Corporation registered in the United States and other co

14 i.LON 100 e3 Hardware Guide The relay connections are implemented on screw terminals 5 through 8. The SPST relay contacts are not polarity sensit

i.LON 100 e3 Hardware Guide 15 Figure 1.7 i.LON Relay Output Connectors Pulse Meter Inputs The i.LON 100 server includes two impulse meter inputs

16 i.LON 100 e3 Hardware Guide Figure 1.8 i.LON 100 Server Pulse Meter Screw Terminals Table 1.5 lists the enclosure marking for each of pulse meter

i.LON 100 e3 Hardware Guide 17 Figure 1.9 i.LON 100 Pulse Connectors See Chapter 8 of the i.LON 100 e3 User’s Guide for instructions to follow wh

18 i.LON 100 e3 Hardware Guide Figure 1.10 i.LON 100 Server Digital Input Screw Terminals Table 1.6 lists the enclosure marking for each of the digi

i.LON 100 e3 Hardware Guide 19 Figure 1.11 i.LON 100 Server Digital Input Connectors Figure 1.9 i.LON 100 Pulse Connectors See Chapter 9 of the i

20 i.LON 100 e3 Hardware Guide Figure 1.12 i.LON 100 Server LONWORKS +12V < 20mA Output Terminals Table 1.7 lists the enclosure markings for the

i.LON 100 e3 Hardware Guide 21 the IP address, subnet mask, and the FTP user name and password of the i.LON 100 server. This application is optio

22 i.LON 100 e3 Hardware Guide RJ-11 Telephone Line Port ! Safety Warning The i.LON 100 server’s telephone modem should only be used with telephone c

i.LON 100 e3 Hardware Guide 23 2 Server Service Buttons and LEDs This chapter describes the service buttons and LEDs included on the i.LON 100 se

FCC Compliance Statement – Class B This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Par

24 i.LON 100 e3 Hardware Guide i.LON 100 Internet Server LEDs The following LEDs provide status information for the i.LON 100 server. Power/Wink Thi

i.LON 100 e3 Hardware Guide 25 transmit data indicator that turns on when LONWORKS data is being transmitted. i.LON 100 Internet Server Buttons T

26 i.LON 100 e3 Hardware Guide

i.LON 100 e3 Hardware Guide A-1 Appendix A Troubleshooting This appendix can be used to diagnose hardware problems that may occur during the ins

A-2 i.LON 100 e3 Hardware Guide My Service LED is blinking, what does this mean? • The Service LED blinks when the i.LON 100 device is uncommissio

i.LON 100 e3 Hardware Guide i Purpose The i.LON 100 Internet Server is a low-cost, high-performance network interface and network device that conn

ii i.LON 100 e3 Hardware Guide Assembling the i.LON 100 Internet Server 1 Assembling the i.LON 100 Internet Server...

i.LON 100 e3 Hardware Guide 1 1 Assembling the i.LON 100 Internet Server This chapter describes how to assemble the i.LON 100 server. This inclu

2 i.LON 100 e3 Hardware Guide Assembling the i.LON 100 Internet Server You will need to assemble the i.LON 100 server before configuring it, connecti

i.LON 100 e3 Hardware Guide 3 6. Open the Windows Command Prompt window and enter the following command (this is the exact text of the command):