16
i
.LON 100
e3
Hardware Guide
Figure 1.8
i
.LON 100 Server Pulse Meter Screw Terminals
Table 1.5 lists the enclosure marking for each of pulse meter screw terminals.
Table 1.5
i
.LON 100 Server Pulse Meter Connections
Screw Terminal Enclosure Marking Pulse Meter Connection
9 Meter2- - Signal from Meter 2
10 Meter 2+ +Signal from Meter 2
11 Meter 1- - Signal from Meter 1
12 Meter 1+ + Signal from Meter 1
The pulse meter inputs can be connected to either a dry contact relay, or to an
active device output that generates pulses by closing the circuit between the two
terminals. Figure 1.9 demonstrates both configurations.
Comments to this Manuals